Learning Ukulele 50 Sites Top 50 Ukulele Sites Argapa Ukuleles - one size louder: Traveller mk II completed

Saturday, April 7, 2018

Traveller mk II completed

Of course I use the regular wooden violin pegs for the traveller, but the geometry makes it a bit different. The pegs need to be both thinner and longer to work, you’ll see why in a bit. 

To get them to a consistent taper I use the peg shaper, an advanced sharpener not unlike those for pencils. In this case I went further to get them thinner too. 



And why do I need them thin then. It’s because of my reamer, to get a larger hole it would need to go further in and it can’t of course, the width of the soundbox prevents that. I could cut my reamer off but don’t want to mess with an expensive tool. 



Here they are, the pegs. Before I cut them to length. To the right is the carbon fibre tube that guides the strings. It’s not perfectly perpendicular to the sides. I guess it’s true then, only Allah can achieve perfection. 



Here it is next to the OG, number 102. This new one is number 105, I really should pick up the pace. You can see the extra bit at the nut end, it really does help and makes it a lit easier to play first position chords (which means playing at all in my case).



And from the back. If I ever build another I will make the recess first, then cut the board to length and width. I must remember that. 



As it wasn’t ever touched with sandpaper I included the code ZS for zero sanding. This uke will be for sale at or after MUMF in May. 



No comments: